This is just a quick update to show some configuration screens for an internal PCI hardware modem.
These screen shots are from a BeOS R5 install.
The modem installed in the system is a 3Com / US Robotics model 3CP5610A 56k Performance Pro Modem.
When the modem is setup as shown below you should have a 'Serial 5' listed for you in
'Dial-up Networking -- Modem -- Connect Via' as shown Here in step 16.

There is an excelent modem setup guide available at: http://www.becenter.com/beos_guide/connect_internet/
It is very comprehensive and well put together - I highly recommend it.


(Please note: this is not meant to be an endorsement of this product over any other.
It's just an example of a working PCI modem :-) )